Speedometer display failing to remain.

All Toyota C-HR related discussions
Iangrimmett
Posts: 59
Joined: Sat Apr 22, 2017 9:00 am
Location: Gloucestershire

Speedometer display failing to remain.

Post by Iangrimmett » Fri Feb 12, 2021 1:06 pm

I have a 3017 CHR.

When the digital speed display is selected, it used to remain until changed to something else such as mpg achieved.
Now the display defaults to the mpg display whenever the ignition is turned off and on again at next starting.

Any ideas please?

Rexleroy
Posts: 8
Joined: Mon Jul 06, 2020 4:28 pm
Location: Middlesbrough

Re: Speedometer display failing to remain.

Post by Rexleroy » Sat Feb 13, 2021 10:44 am

Same here let's hope someone as a fix

Iangrimmett
Posts: 59
Joined: Sat Apr 22, 2017 9:00 am
Location: Gloucestershire

Re: Speedometer display failing to remain.

Post by Iangrimmett » Sat Feb 13, 2021 12:17 pm

It is a pain in the butt and I cannot figure out why it is suddenly happening.
Since it occurred, the only thing that has received attention in the electronic department is a totally replaced entertainment/sat. nav. unit but I cannot see how they would be connected.
I will contact Toyota UK today.
Regards.

adn1962
Posts: 332
Joined: Wed Feb 12, 2020 6:03 pm
Location: Solihull, West Midlands

Re: Speedometer display failing to remain.

Post by adn1962 » Sat Feb 13, 2021 2:58 pm

Mmmm......mine stays on digital speedo display. There are no settings as far as I know to stop this happening.
Metalstream Excel 2018. Mud flaps, dash cam, Bumper corner protection, chrome boot and sill protectors, door handle protection film, Smoked Toyota wind deflectors, Spare wheel kit.
Bike - 2018 Honda Forza 300, touring screen, top box and Puig handguards.

Iangrimmett
Posts: 59
Joined: Sat Apr 22, 2017 9:00 am
Location: Gloucestershire

Re: Speedometer display failing to remain.

Post by Iangrimmett » Sat Feb 13, 2021 3:17 pm

Thanks for response, mine did too, only recently began to occur.

Alexr
Posts: 684
Joined: Sat Jan 07, 2017 10:39 pm
Location: Reading, UK

Re: Speedometer display failing to remain.

Post by Alexr » Sun Feb 14, 2021 12:33 pm

Just tried mine, and display stayed after stop/start. Not sure why yours is not.
All the best
Alex
------------------------
Loved driving my C-HR Excel Hybrid in Metal Stream for 4 yrs
Now loving my C-HR 2.0 Dynamic in Pearl White and black. :P

adn1962
Posts: 332
Joined: Wed Feb 12, 2020 6:03 pm
Location: Solihull, West Midlands

Re: Speedometer display failing to remain.

Post by adn1962 » Sun Feb 14, 2021 6:45 pm

■ Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■ During setting up the display
To prevent 12-volt battery discharge, ensure that the hybrid system is oper- ating while setting up the display features.
Metalstream Excel 2018. Mud flaps, dash cam, Bumper corner protection, chrome boot and sill protectors, door handle protection film, Smoked Toyota wind deflectors, Spare wheel kit.
Bike - 2018 Honda Forza 300, touring screen, top box and Puig handguards.

Spen2811
Posts: 12
Joined: Thu Jun 25, 2020 8:32 pm
Location: Leicestershire

Re: Speedometer display failing to remain.

Post by Spen2811 » Sun Feb 14, 2021 7:01 pm

Mine was ok until had its 40k service now set at mpg

User avatar
Craig
Posts: 52
Joined: Fri Jun 30, 2017 5:12 pm
Location: West Yorkshire

Re: Speedometer display failing to remain.

Post by Craig » Fri Feb 19, 2021 2:45 pm

I find this a PITA.
I want it to show the digital speed every time. Sometimes it is on when I start. Sometimes it doesn't.
Add that knobody thought I might want it to default to sport mode at start up.
And I would like brake hold on as default.
It is like getting a ringbinder out and checking the pre-flight checks in a plane. I need a bloody co-pilot with me reminding me of the check list at start up. What a pain it is to switch the things on everytime. I work in programming and this is what we are talking about. Why Toyota didn't allow you to set default values I don't know.
Dynamic Blue 12T and what a lovely car she is.

adn1962
Posts: 332
Joined: Wed Feb 12, 2020 6:03 pm
Location: Solihull, West Midlands

Re: Speedometer display failing to remain.

Post by adn1962 » Sat Feb 20, 2021 2:59 pm

Brake hold setting would be good. I get a little fed up of having to switch it on every time I get in. Not bothered about Sport mode as I rarely use it.

My digital speedo setting stays in display - until I choose to change it.
Metalstream Excel 2018. Mud flaps, dash cam, Bumper corner protection, chrome boot and sill protectors, door handle protection film, Smoked Toyota wind deflectors, Spare wheel kit.
Bike - 2018 Honda Forza 300, touring screen, top box and Puig handguards.

Post Reply