Toyota C-HR Forum banner

audio is off on Sat Nav

27K views 13 replies 9 participants last post by  IceColdCrash 
#1 ·
I feel stupid but cannot find how to turn on the audio on the sat nav.
It must be something really simple but I can't find any instructions and have tried experimenting with button pressing to no avail.
Someone tell me how to do it?
 
#5 ·
See the picture.. there is a button with a X that is darker.. that means the volume is muted.

Maybe the volume of the satnav is down to 0.
You can adjust that in the menu.

Or try this :
- program your satnav to a location, go drive and let it run
- Check if there is a button with a X that is greyed out.. if so, push it to un-mute
or
- Press the name of next road (left bottom on display) and after that immediately press volume UP on steering wheel.
--> The volume of satnav is adjustable with the steering wheel buttons while the lady is talking. ;)

Hope this helps. :D
 
#6 ·
Thanks wachyracer, but if you mean the loudspeaker icon on the right, pressing that has no result.

I've tried adjusting the volume to the highest but that doesn't work.

I'll try with it programmed for a destination - perhaps DutCHR that will work. I'm travelling tomorrow and Sunday which is why I wanted it to work!
 
#7 ·
GWCAR said:
Thanks wachyracer, but if you mean the loudspeaker icon on the right, pressing that has no result.

I've tried adjusting the volume to the highest but that doesn't work.

I'll try with it programmed for a destination - perhaps DutCHR that will work. I'm travelling tomorrow and Sunday which is why I wanted it to work!
Ah you MUST have it programmed to take you to destination - or it can't tell how to get there.
 
#10 ·
Thanks to all who made suggestions. It was, of course, quite simple. No changes can be made unless a destination is entered and it is set up to follow a route. It worked perfectly when I did that and clicked the greyed out loudspeaker symbol.
As for the instructions, it doesn't actually say that anywhere I could see.
 
#12 ·
I have just hired a 2019 CHR and been frustrated with no audio navigation guidance. I read the above with interest however the solutions were not available to me...No greyed out speaker symbol even when navigating, and no change when pressing the volume button repeatedly..of course with NO sound it was hit and miss when to use the volume button. Finally resolved the issue by locating the the "automatic navigation guidance" option that wasn't ticked as active by selecting the settings symbol (cog) from the home screen (Not using the navigation screen) then selecting "voice" . Hope this helps anyone else in the same boat.
 
#14 ·
You have 2 options to raise volume,
1 is when the voice is speaking,
As that's not an easy one (to catch it while it's speaking),
Setup a journey, after that, click the icon with the instruction on the corner and voice will replay last instruction, while voice is on, turn volume up.
Hope I made this understandable
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top