Toyota C-HR Forum banner

Toyota C-HR Technical specifications

9747 Views 0 Replies 1 Participant Last post by  Rob
Technical specifications for the C-HR have been released by Toyota. In the UK, the range will be topped out by a 1.8-litre four-cylinder mated to an electric motor to produce a total of 120 hp and achieving 78.5 mpg over the combined cycle, all while emitting just 82 g/km of CO2 emissions.

Last but not least is a 1.2-liter turbo petrol engine already available on the Prius, outputting 114 hp and 185 Nm of torque. This engine can be joined to either a six-speed manual transmission or a CVT and will also be offered in front and all-wheel drive configurations.

Rectangle Font Material property Parallel Screenshot


Front suspension MacPherson strut with anti-roll bar
Rear suspension Multilink with trailing arm, coil springs and anti-roll bar

Type Rack and pinion, electric power steering
Ratio 13.6:1
Turns lock-to-lock 2.76
Min. turning circle (m) 10.4

Front (diameter, mm) Ventilated discs, 298.5
Rear (diameter, mm) Solid discs, 281
Parking brake Electric

Overall length (mm) 4,360
Overall width (mm) 1,795
Overall height - 1.2T/Hybrid (mm) 1,565/1,555
Wheelbase (mm) 2,640
Track - front (mm) 1,550 (16/17in wheel)1,540 (18in wheel)
Track - rear (mm) 1,550 (16/17in wheel)1,540 (18in wheel)
Load capacity (VDA, l) 377

* Model specifications and performance data are for international markets; UK-specific information will be announced later.


See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.