Toyota C-HR Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
This little sh1t down there is so loose that i find it unacceptable. :evil:
Part number 55607-F4010 in this catalogue https://partsouq.com/en/catalog/genuine/unit?c=Toyota&ssd=%24HQwdckgWVlERDhZJUEsKBgUFEB8UFAIRWwgTFmVzYXV7SUlZEF5XFwgTFngsPUgCfxl0enV6bjNHVRIRQlYQCRQUXVNJZREYFRBVXVJJX1kKTkpAW1d0TUkGEFYRDgYeEVJfD0dDEAYBBQMRGBQCC1sIEQEAAQsGBypHBExsdGBqdV50OBdIQWtDFA%24&vid=0&cid=3&uid=215698&q=

It rattles very often and it's really annoying. It hangs on three clips. Is any other 1.2 turbo owner here having this problem?

 

·
Registered
Joined
·
141 Posts
insomnia said:
This little sh1t down there is so loose that i find it unacceptable. :evil:
Part number 55607-F4010 in this catalogue https://partsouq.com/en/catalog/genuine/unit?c=Toyota&ssd=%24HQwdckgWVlERDhZJUEsKBgUFEB8UFAIRWwgTFmVzYXV7SUlZEF5XFwgTFngsPUgCfxl0enV6bjNHVRIRQlYQCRQUXVNJZREYFRBVXVJJX1kKTkpAW1d0TUkGEFYRDgYeEVJfD0dDEAYBBQMRGBQCC1sIEQEAAQsGBypHBExsdGBqdV50OBdIQWtDFA%24&vid=0&cid=3&uid=215698&q=

It rattles very often and it's really annoying. It hangs on three clips. Is any other 1.2 turbo owner here having this problem?
if you mean this one on photo below, yes it very loose especially on the back side is falling down. Although im not sure if it rattles while driving.

 

·
Registered
Joined
·
172 Posts
No problem with that in my C-HR.

Not by accident someone hit it with his foot upon boarding?
 

·
Registered
Joined
·
380 Posts
It should be "pinned" in 2 holes at the back and 3 clips in the front.
It is a bit wonky but shold be fixed on both ends.
 

·
Registered
Joined
·
141 Posts
mjvdzwet said:
It should be "pinned" in 2 holes at the back and 3 clips in the front.
It is a bit wonky but shold be fixed on both ends.
Confirmed, mine is pinned like this, and feels little wonky as u said.
 
1 - 8 of 8 Posts
Top