Toyota C-HR Forum banner

led interior lights. pic intensive

46210 Views 79 Replies 24 Participants Last post by  raija
10
very easy only takes ten minutes, tools flat head screw driver , was going to do a write up but here is the before and after shots if any wants any more info im at Bentley on the 29 april :)
boot first
Automotive lighting Hood Automotive tire Amber Bumper

Automotive lighting Automotive design Automotive tire Vehicle door Bumper

then rear interior
Automotive lighting Car Hood Light Grille

Automotive parking light Automotive lighting Grille Automotive design Car

then vanity lights
Grille Automotive design Automotive lighting Personal luxury car Automotive exterior

Grille Automotive design Grey Personal luxury car Automotive exterior

and front light,just get your fingers around the back near screen and gently pull down remove cable.
Automotive design Grey Font Walking shoe Personal luxury car

run fingers round edge of clear lens and it should just pop out change bulbs.
White Automotive design Car Personal luxury car Carbon

re-attach making sure little tab is inserted into hole by big tab first
Hood Automotive lighting Aircraft Automotive tire Automotive design

Vehicle Light Automotive design Mirror Grey

also did number plate bulbs but wont let me upload any more pics,need small hands for this one
very pleased with results

Attachments

See less See more
1 - 20 of 80 Posts
Looks great,Excellent result,I did the same myself with slightly different bulbs.
Talking of bulbs What bulbs did you use for the number plate and where did you get them?
2
Kiss u said:
Looks great,Excellent result,I did the same myself with slightly different bulbs.
Talking of bulbs What bulbs did you use for the number plate and where did you get them?
these
http://www.ebay.co.uk/itm/10X-8-SMD-LED-T10-W5W-CANBUS-NO-ERROR-FREE-XENON-WHITE-SIDE-INTERIOR-LIGHT-BULBS/351620762840?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3Ddd9c4469822b4cedb2cfc97fcd33a61a%26pid%3D100033%26rk%3D1%26rkt%3D8%26sd%3D351620762840

very easy to do as well just pop the 2 panels out put your hand in and twist

Hood Automotive lighting Automotive design Automotive exterior Cloud

Cloud Tire Automotive lighting Hood Wheel

Attachments

See less See more
You must be a mind reader,I was just going to post a question asking you how easy!
Many thanks for that,bulbs ordered.
Looks good! Any chance of a few night pictures so we can see how bright they are?
give us an hour ;)
2
not dark yet but here you go
Vehicle Automotive lighting Car Motor vehicle Automotive design

Automotive lighting Motor vehicle Hood Light Automotive mirror


will take some more in a bit

Attachments

See less See more
2
couple more

Attachments

See less See more
Kiss u said:
You must be a mind reader,I was just going to post a question asking you how easy!
Many thanks for that,bulbs ordered.
just aheads up wth the bulbs if they dont appear to work turn them round, ;)
How many bulbs are needed to change them all?
Did you use only this one kind? Are there different bulbs for number plates?
:D Number plate bulbs arrived and fitted from your link.(thanks for the heads up about turning the bulbs around!)
Looks so much better.
That's OK .they do look so much better especially at night
very easy just watch this
Thanks ans for your help, so to change them all including number plates, we need 7 x T10 (W5W) and 1 x feston for the rear passenger correct ? The feston onr should be an adapter style like your link ?
yep just order what is in the links, there are others out there for the rear interior light but i find this one more than bright enough
If LED bulbs are so good, efficient, cheap, and easy to install, then why TOYOTA does not use them in the first place? :?: :|
1 - 20 of 80 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top