Toyota C-HR Forum banner
1 - 15 of 15 Posts

· Super Moderator
Joined
·
1,963 Posts
Nice
 

· Registered
Joined
·
40 Posts
Discussion Starter · #8 ·
I installed the next base 312. I got power from the 12 vol socket in centre console I don't use that for anything. I ran cable out f centre console down side of passenger seat then toiled it under centre console then under plastic guard in passenger footwell then up under the seal and the tooled it behind the roof lining. Tools need absolutely none and all wires fooked away out of site
 

· Registered
Joined
·
558 Posts
I got power from the 12 vol socket in centre console I don't use that for anything. I ran cable out f centre console down side of passenger seat then toiled it under centre console then under plastic guard in passenger footwell then up under the seal and the tooled it behind the roof lining. Tools need absolutely none and all wires fooked away out of site
Thanks for that , had been trying to work out how to do it, it was the under the seal bit I hadn't thought of, done the same on mine now and it worked a treat and as you said no tools needed. I've got an adapter so I've got two sockets in the centre console, one for the camera the other has a twin usb socket so we can charge two phones at the same time. Also I added an inline fuse to the camera power supply To be on the safe side.
 

· Registered
Joined
·
641 Posts
I tell you what people would appreciate Gazza. A pictured and step by step guide on how you did it.
Wouldn't take you long and people would find it super helpful. Especially the Destroy it Yourself types like me! :)
 

· Registered
Joined
·
40 Posts
Discussion Starter · #13 ·
Ok step by step

1. Position camera
Automotive parking light Vehicle Automotive lighting Hood Automotive mirror


2. Run wire between 2 sensors at top of window screen and then took wire behind roof lining across to front pillar then took down behind front pillar Automotive design Rim Vehicle Carbon Tints and shades


3 once around top of pillar start to follow door seal down pillar FOOKING wire in as u go Sleeve Automotive mirror Gesture Eyewear Audio equipment
 

Attachments

· Registered
Joined
·
40 Posts
Discussion Starter · #14 ·
4 follow seal all way down to bottom of dash board tooling wire in as u go
Automotive design Personal luxury car Tints and shades Electric blue Auto part


5 once at bottom run cable across bottom of dash board
Hood Product Automotive tire Automotive design Vehicle


6 if you look under passenger side dash there is a plastic tray to stop someone pushing there feet up under dash this has 3 clips simply unclip
Hand Air gun Gesture Automotive exterior Finger


Run cable alon top of this tray to the centre console once at centre coconsole took wire under this towards passenger seat Hand Sleeve Gesture Musical instrument accessory Finger


Then run cable up the side of passenger seat to you 12 volt socket and there u go done all working and camera will come on and off as you start car and off when engine off so won't drain battery Automotive design Camera accessory Cameras & optics Carbon Gear shift
Brown Automotive design Grey Personal luxury car Tints and shades
 

Attachments

1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top